Competition in Energy Drinks Case Study Example | Topics and Well Written Essays - 1250 words

Competition in Energy Drinks - Case Study Example More consumers have developed preference for drinks other than carbonated drinks. The demand for alternative beverages in the US in 2009 contributed to the global demand considerably, with close to half of the demand for beverages coming from the US. Sales in the US made up 42.3% of the $40.2 billion in sales in 2009. The alternative beverage section changed the status-quo in the beverage industry, since it was, at the beginning, a unique product that offered better nutritional quality. The alternative beverage section of the beverage industry has unique economic characteristics too. To begin with, the growth of the segment depends on the purchasing power of the consumer. As more consumers become more economically empowered and their desire to have healthier lifestyles increases, they tend to switch from the carbonated drinks to the alternative beverages. Secondly, the alternative beverage section appeals to all age groups in the society (Christou & Vettas, 2003). Carbonated drinks are more associated with adults than school-going children because of the chemical components. Analysts in the industry project a decline in the sales figures for carbonated soft drinks and an increase in sales of sports drinks, ready-to-drink tea, energy drinks, bottled water, fruit juices, and vitamin-enhanced beverages among other types of alternative beverages, setting the ground for competition among companies producing alternative beverages. Competition in the beverage industry is considerably intense, with the established companies such as PepsiCo and Coca-Cola facing stiff competition from other companies such as Redbull (Gerber, 2010). Other companies other than PepsiCo, Coca-Cola and Redbull, with a 55% market share, dominate the larger share of the global market. In the United States, PepsiCo had the larger share at 47.8%, while the other companies had 31.5% of the total market share. Both

Globalization Of The Market Economy Essay Example for Free

Globalization Of The Market Economy Essay Much has been said how globalization has internationalize the market economy and how this system was able to integrate and create international partnerships between and among nations. Globalization is not just a phenomenon – it is a system, a new world system that has replaced the Cold War. Globalization has transcended economic and political borders without so much undermining the national sovereignty of any nation. This essay will document how the key players and catalysts accomplished the integration of a very complex world market economy, allowing the creation of the so-called global village. Specifically, this essay will look into the following: ? the creation of international bodies collectively known as The Bretton Woods institutions; ? the largest regional trade organizations: how they come into being, its membership, and how they are being seen sometimes as stumbling blocs, instead of building blocs; ? multi- or transnational corporations; and ? technological revolution (information and communication technology, or ICT, and the Internet). The list above will help us see globalization, an intangible system, as an observable, concrete, and measurable concept. This essay will also attempt to explain the future of globalization so as to prepare other areas that it has not penetrated yet, and at the same time, to allow those who are experiencing it already to take advantage of the strengths and opportunities in the system and be prepared with the threats that come with it. Understanding globalization There are two very interesting books on globalization that can serve as a starting point of this essay – MacGillivrays A brief history of globalization: The Untold story of our incredible shrinking planet and Friedmans The Lexus and the olive tree: Understanding globalization. MacGillivray argues that the term â€Å"globalization† has rapidly become one of the most overused words in the field of international relations. Unfortunately, its being overused does not guarantee understanding of the concept. In fact, this is one of the least understood or at least broadly construed concepts in the same field. It clearly covers connections between and among political, economic, cultural, and even environmental issues or concerns. And with the recent advance in information technology, we also know that globalization also concerns itself about technology and even war. MacGillivray described globalization as the interaction and integration between and among people, corporations, and governments across national boundaries. Such web of interaction and integration is motivated by international trade and investment with the help of technology, particularly, information technology (MacGillivray 2006). The importance of technology in the era of globalization was further elaborated and described by Friedman in his book The Lexus and the olive tree: Understanding globalization through this passage: â€Å"In the Cold War, the most frequently asked question was ‘How big is your missile? ’ In globalization, the most frequently asked question is ‘How fast is your modem? ’† As compared to other writers who believe that globalization is a phase of human evolution, or maybe a trend, Friedman believes that it is more of an international system which existence was significantly felt after the Cold War period. He argued that the movement of globalization in this contemporary period is just an extension of the previous period which has marked the end of the First World War (Friedman 1999). Whereas the Cold War has changed the whole world into a bipolar one, globalization has changed this into a global village with shared or integrated resources in terms of capital, technology, political and market sentiments, and information across and, even more interesting, through national borders. Establishing new grounds: The collapse of economic and market frontiers Globalizations effects are very much visible in some aspects of international relations. In this essay, the effect on economic sovereignty would be the focus. It should be noted though that as far as these effects are concerned, globalization does not destabilize the sovereignty and legitimacy of a nation in any one way or another. With globalization, we could say that the economic borders of any sovereign nation has somewhat been transcended, i. e. , protectionist policies are either challenged if not eliminated completely. The Bretton Woods system: The first attempt to international openness One of the best ways of seeing globalizations effect to international relations is by looking at international financial institutions having direct or indirect effect to sovereign nations. While they do not exactly dictate what the economic policies of countries should be, these bodies without a doubt influence the making of such policies. In the early 1930s, currency exchange rates, even those of the major economies, are unstable. A number of countries are protectionists and had very restrictive trade policies. A decade after that, Great Britain and the United States, the only two super powers then, proposed the establishment of international financial or monetary institutions that would aim to stabilize exchange rates and, more importantly, improve international trade. In 1944, 44 nations through their representatives convened at the United Nations Monetary and Financial Conference in Bretton Woods, New Hampshire. The participants of the conference met to plan the recovery and eventual development of post-war Europe and to discuss the monetary and prevailing economic issues of that period – protectionist trade policies and unstable exchange rates of a number of countries (Bretton Woods Project 2007; Canadian Economy Online 2007). This has given birth to the Bretton Woods Agreement. The agreement aims to create a post-war international monetary system of convertible currencies, fixed and stable exchange rates, and free trade across geographical regions. The International Monetary Fund (IMF) and the International Bank for Reconstruction and Development (which was later on referred to as the World Bank) were established to facilitate the objectives of the agreement. The resulting bodies from this Bretton Woods convention have definitely affected the economic sovereignty of countries. Taking the case of International Monetary Fund, its main areas of concern are surveillance (advice and appraisal on the policies of its member economies), financial or monetary assistance for members experiencing short- to medium-term economic problems and difficulties, and technical assistance as well as training in monetary and fiscal policies (Ibid). The Bretton Woods agreement prevented currency and exchange rates competition and promoted monetary cooperation among its member economies. Under this system, member nations and economies agreed to have a system of currency exchange rates that could be adjusted or computed within defined parities with the US dollar. This currency exchange rate could also be adjusted to correct a basic disequilibrium in balance of payments as approved by IMF. Advocates of the Bretton Woods system argued that establishment of a stable exchange rate would discourage the â€Å"beggar thy neighbour† policies, which would eventually benefit several, if not all, member economies by the promotion and expansion of international market and trade. The competitiveness of currency exchange rates decreased overtime due to infrequent changes in parities. Some expressed concerns that a fixed currency exchange rate system may prohibit countries enough liberty for them to actually pursue and implement their own monetary and fiscal policies. IMF uses both its surveillance as well as technical assistance work or functions in developing codes and standards of good practice in its areas of responsibility (Articles of Agreement of the International Monetary Fund 2007). The World Bank, which is officially named International Bank for Reconstruction and Development, is actually a development institution. Its mandate is to build a climate of healthy investment, sufficient jobs, and sustainable growth. It also invests in poor people and empowers them to participate in development projects. Its efforts on poverty reduction can be observed in national as well as global levels (Schiff and Winters 2003, 15–16). The World Bank gives emphasis on extending aids to poor and developing nations. But more than just these financial aids or loans, the bank gives advice on policymaking and training to countries needing them. Now, in return for IMF’s and World Bank’s financial support or any other kind of advice, recipients of these financial aids should implement necessary structural adjustment policies that will encourage healthy public spending, especially on social services delivery systems. These policies usually decrease government’s participation in the economy (or market, to be specific). Currently, the World Bank is the largest international lending institution dealing with least developed to developing countries (Ibid, 25–26). The World Trade Organization is probably the most â€Å"intrusive† of the three bodies established by the Bretton Woods convention. The convention created a provision for an International Trade Organization. However, such plan lay dormant until the actual establishment of the World Trade Organization in early 1990s. This original plan did not materialize in the form it was originally conceptualized because of the refusal of the US Congress to endorse it. (The refusal of the US Congress is primarily anchored on the idea that had the International Trade Organization been approved then, this body would have the power of a supranational body that can implement sanctions, penalties, or disciplines to any member economies that the ITO deem violating the principles and agreements reached at the Bretton Woods. ) In lieu of this, an international organization, so to speak, in the form of General Agreement on Tariffs and Trade or GATT was created. As an international body, it has the primary responsibility of reducing trade barriers through multilateral and multinational negotiations. ITO, however, does not have the power to effect any policies, i. e. , its agreements are non-binding (Timeline: World Trade Organization – A chronology of key events 2007). The World Trade Organization came into existence on 1995. It replaced GATT as an international body overseeing the multilateral trading system. One hundred and twenty-eight (128) countries had signed GATT by 1994. And as of the year 2007, there are 151 full-fledged members and 30 economies/countries having observer status. Every member country of the WTO has the right to challenge or simply question other countries local, state, or federal laws granted that such laws may impede efficient and effective international trade. In such cases, if the WTO judges the law to contain violations of WTO ideals, it [WTO] may order the government to overturn or modify the law or else, the country can experience or suffer from trade sanctions. This is exactly why the US Congress did not approve the ratification of the treaty for the creation or establishment of the WTO (Ibid). These three international bodies have clearly penetrated the economic barriers, even political to some extent, of any of its member economies. For this purpose, however, it is clear that these effects are for the benefit of the member economy. While it is clear that these Bretton Woods bodies do not directly dictate economic policies, it has the power to influence its members to act towards its direction. Again, this is not to emphasize that economic sovereignty is being taken away from the country itself, but clearly, the economic barriers have been breached. Regional trade associations or blocs Regional trade associations are â€Å"offshoots†, so to speak, of the globalization phenomenon where inter-nation or inter-state agreement is established. These associations are actually the ones that manage, promote, and direct all the trade activities of the concerned group of countries or regions of the world (UC Atlas of Global Inequality, 2007). This is a case where instead of an institution penetrating the borders of a country, the sovereign country itself initiates the â€Å"surrender† of their economic, or more particularly, trading, policies. Regional trade associations, in general terms, are groupings of economies or nations at a governmental level that aims to promote, manage, and encourage trade within and among their own region and defend its member countries or member economies against a larger global competition. Protection against this larger global competition is done by most countries by establishing tariffs on commodities produced by its members economies, import quotas, onerous bureaucratic import processes, government subsidies, and technical and other non-tariff barriers. Trade is not an isolated activity and other areas of relations between countries or economies involved are also affected: political, security, and other issues affecting the region (Ibid). A good example of a regional trade bloc affecting other aspects of inter-national relations is the case of the European Union or EU. This group is the world’s largest trade association, and by far, the most effective in terms of certain aspects. EU has harbored not just economic but also political ambitions extending way beyond the free trading arrangements entered into by the participating economies (Gibb and Michalak, 1994, 75). The ideological foundations of EU were actually focused on ensuring development and maintaining international or even inter-regional stability, specifically, encapsulating communist or socialist expansion in the post-WWII Europe. EUs plan actually involves possible joint policies on military security and citizenship. Some researchers believe that trade associations complement globalized trade. There are those, on the other hand, who believe that regionalism is a threat to free trade due to its protectionist nature having conservative policies being implemented by these blocs that shield the member- countries from outside competition of global trade. Such debates contain sharp disagreements. In the same work by Gibb and Michalak (1994, 1), they noted, â€Å"the multilateral trading system is in decline and regionalism is on the ascendancy. † They emphasized that regional trade blocs are an alternative form of trade that â€Å"attempts to counter more aggressive policies of trade, especially as espoused by the WTO. †

Music Essays History of Rhythm and Blues

Music Essays History of Rhythm and Blues History of Rhythm and Blues Rhythm and blues was considered strictly black music. Although I am not part of the American culture, I consider my cultural heritage to be somewhat related to this culture. The black culture is a phenomenal subject representing the life style, imagination and accomplishments of people. One of the most outstanding and unique characteristic that makes this culture one of a kind is the music it has produced. Music has a common characteristic that is unique to all cultures throughout the world. However, the music’s form, or style, every culture in history includes music as an important part of everyday life. The four most popular categories of Black music are Blues, Jazz, Gospel, and Rhythm and Blues. Blues is an African American music that transverses a wide range of emotions and musical styles which is expressed in songs that verse injustice or express longing for a better life and lost loves, jobs, and money. Jazz is music that consists of musical instruments such as saxophone s, flutes, and clarinets. Gospel music refers to African American Protestant vocal music that celebrates Christine Doctrine in emotive. Rhythm and Blues is a combination of the swinging rhythm of jazz and other â€Å"race† music with the lyrical content, sonic gestures, and with the format of the blues. Today I want to focus on Rhythm and Blues and the influence it has made on the black culture, and discuss the three major forms that made Rhythm and Blues distinguishable, and how it has change from jazzy/blues to hip hop/rap. Rhythm and Blues music or RB has a variety of different types of music. It is produced and supported primarily by blacks around the world. Beginning in the early 1940s, rhythm and blues music embraced genres as jump blues, club blues, black rock, and roll, doo wop, soul, Motown, funk, disco, and rap. It was first coined in 1949 by Jerry Wexler, who became prominent with Atlantic Records. Wexler used the term rhythm and blues as a synonym for black rock and roll in the early and mid 1950s. RB provided the single greatest influence on popular music worldwide for much of the second half of the 20th century. The influence was traced in forms of rock music, country and western, gospel music, and jazz as well as in a variety of non western form of music known as worldbeat. According to Joseph Machlis and Kristine Forney in their book The Enjoyment of Music, Rhythm and blues is known for its predominantly vocal genre, featuring a solo singer accompanied by a small group including piano, guitar, acoustic bass, drums, and tenor saxophone. Its harmonies and structure are drawn from twelve bar blues and thirty two bar pop song form. As the name implies, the style is characterized by a strong, driving beat, usually in a quadruple meter. As the influence of various styles of Rhythm and Blues, black urban values have permeated a wide variety of other cultures, most notable of contemporary Euro American youth. (599) According Christopher Handyside’s book Soul and RB. Handyside states that Rhythm and Blues (RB) was a name given to a fast paced style of music that was influenced by blues, gospel, and jazz. Handyside states that RB also owed its style to â€Å"jump blues.† Jump blues was popular in the 1930s and 1940s, and was usually played by a large band that featured drums, saxophone, and trumpet, stand up bass, guitar, and other horns as well as a singer. By the late 1940s, jump blues had developed into RB which took the form of shorter, catchier songs. Whereas jump blues often extended the songs with improvisation, RB tended to use smaller bands that featured drums, piano, guitar, and bass to generate the same energy and excitement as a larger band. One of the most significant characteristics shared by both jump blues and RB was the importance of a strong vocal singer. Handyside also states in the late 1940s than writer for the music magazine Billboard, Jerry Wexler, coined up t he name â€Å"rhythm and blues† when he was editing the charts at the trade journal Billboard and found that the record companies issuing black popular music considered the chart names to be demeaning. The magazine changed the charts name in its June 17, 1949, issue, having used the term rhythm and blues in news articles for the previous two years. Although the records that appeared on Billboards rhythm and blues chart thereafter were in a variety of different styles, the term was used to encompass a number of contemporary forms that emerged at that time. (4-5) Handyside states the origins of rhythm and blues originated from the sociological, industrial, and technological changes that took place in the Unites States just prior to and during World War II. Among theses changes was a widespread shift in American demographics. Popular music and new styles were created to meet the changing tastes of the demographic group, which lead to the development of urbane sounds of RB. These sociological changes of the World War II period were accompanied by two significant technological developments, the invention of the electric guitar in the late 1930s and the newly relatively affordable discovery of the German invented tape recorder. With these two inventions it simplified the recording process. Enterprising individuals were able to start independent record companies, since the major record companies in the United States had little interest in RB music. Newly formed independent companies began such as Atlantic, Chess, Specialty, and Modern were crucial for the production and distribution of RB recordings. According to online data form Encarta, another important industrial change was the rise of television in the United States in the late 1940s. For fear that television would make radio stations obsolete, many owners sold their radio stations. The new radio station owners turned to urbanized black Americans. These emergent black oriented radio stations allowed the new independent record companies to air the sounds of Rhythm and Blues to a black urban audience. Although the sounds of black urban music were being performed throughout the United States, the recordings of RB began on two coasts. Big band jazz musician Louis Jordon formed a small ensemble in 1938, which he eventually named the Tympany Five. Jordon recorded primarily in the up tempo beat using the horn driven style of the jump blues. The jump blues style he originated rapidly spread among black musicians, with distinctive regional variants emerging in New Orleans, Louisiana, and Memphis, Tennessee. Jordon influenced every RB artist in the 1940s, 1950s, and early 1960s. There were two other styles of RB that were popular in the late 1940s and early 1950s. It was the instrumental strain on jump blues and featuring a coarse, honking tenor saxophone sound. (Encarta) In the early1950s the strains of Rhythm and Blues began to be directed towards teenagers instead of adults. The vocal group style of the 1940s had given way to the 1950s doo wop. As Handyside states Rhythm and Blues vocal groups or doo wop groups, were becoming more and more popular. It was called Doo wop because of the nonsense syllables the vocalists would often use. It featured close harmony singing at slower tempos. Artists such as the Five Keys, the Coasters and the Drifters, sang songs with lyric themes that voiced concerns of American teenagers. (13) Motown soul music in the 1960s saw three important styles of R&B; the Chicago soul, which was influenced by gospel music songs, the Motown sound, which combined songwriting with a straightforward vocal, and southern soul, which was the most gospel influence style of RB. Chicago soul was epitomized by the work of singer and songwriter Curtis Mayfield with the group the Impressions. Mayfield wrote songs of faith and inspiration which featured several different lead singers trading vocal lines in the call and response fashion. In 1959 the Motown record company was founded by former boxer turned musician Berry Gordy Jr. Gordy was so successful at developing a recognizable sound for Motown that the company name quickly began to be a designation for a genre of music. The music he produced had its roots in gospel, jazz, and rhythm and blues, but with the Mo-town Sound. Its success was also due in part to the songwriting efforts of Lamont Dozier and brothers Eddie and Brian Holland. Motown represented the sound of American youth through most of the 1960s and for an independent record company, achieved unprecedented success. The Motown artist of the 1960s included Diana Ross with vocal group the Supremes, the one and only, singer and songwriter Smokey Robinson with the group the Miracles, and the Temptations. The majority of Motown artist were vocal groups that updated the doo wop style of the 1950s with a heavy, even beat. Southern soul was originated by James Brown and Ray Charles. On many of the early soul records, Charles would take a traditional religious song and transform it into a secular paean to love. Handyside states Rhythm and Blue’s first true superstar and all around musical innovator was Ray Charles. It is not often that one can point to a single song and claim that it invented a new genre, but this was the case with Charles. In 1954 Charles hit song â€Å"I Got a Woman† was the popular notion of â€Å"soul† music. He took the gospel song â€Å"I Got Religion† and changed the lyrics from a song about God to a song about a woman. The music’s bouncing feel was straight out of church and had a strong sense of syncopation. By adding a gospel flavor to the music, Charles had reconnected RB with the spiritual roots and rhythms of African Americans. (11) Handyside states James Brown was a contemporary of Ray Charles. Browns innovations in soul music, style, and live performance had earned him the nickname â€Å"The Godfather of Soul.† Brown had a raspy, soulful voice that he combined with his fancy dance moves. By the mid 1960s he was taking soul in a whole new direction. He laid the ground work for what would be called funk music. Southern soul had remained a significant presence in popular music throughout the 1970s. (19) In the late 1960s at the height of soul music’s popularity, there were significant changes and cultural views began to be articulated by many black Americans. By the end of the 1970s, the soul/RB sound had been eclipsed by the music it had influenced, disco and funk. With the help of James Brown, funk music began to emerge in the late 1960s and early 1970s. Funk was a looser form of soul music. It was based around the groove of the bass guitar, funk songs would stretch out well past the usual three to four minutes of a soul song. According to Handyside, funk’s appeal was limited, and in the late 1960s, rock artist improvised and broke the rules they were also stretching their songs out into extended â€Å"jams.† Funk de-emphasized melody and harmony, bringing rhythm, it often had loud horn sections, scratchy guitar rhythms that extended into wild guitar solos, and was short on lyrical content. Funk musicians tended to favor one line sayings. This style was adopte d by a number of artists. Musicians synthesized the funk style with elements from white rock music. (33) Disco rivaled funk’s popularity in the early 1970s and surpassed it by the middle of the decade. Hanydside states, like funk, disco was a dance oriented style. It was born out of funk, mixed with the slick Philly Soul. It was named not for any particular characteristic of its music, but after the places where it was originally played, the discotheques. (38) By the mid 1970s funk’s grooves had been smoothed over to help create disco. In contrast to funk, disco was dominated by arrangements featuring strings and synthesizers to boost the important beats. Disco was viewed by many as a substantial treat to rock music. It gave rise to a handful of highly original ensembles, as Earth, Wind Fire and the Fatback Band. Although the craze for disco eventually waned, it was an important source of rhythms and sounds in hip hop, techno and house music. (39) According to online data from Encarta, in the late 1980s and 1990s disco gave way to other genres like hip hop and rap music. By the early 1990s, hip hop had become a major force in music. Hip hop began when DJs such as Kool Herc, Grandmaster Flash, and Africa Bambaataa would mix beats or â€Å"breaks† of funk and disco records so that people could dance to the beat continuously. In 1991 Mary J. Blige teamed up with producer Sean â€Å"Puff Daddy† Combs and added the hip hop attitude to RB. Blige was one of the first artists to blend urban, contemporary RB singing with hip hop beats, rhymes, and attitude. Machlis and Forney states that after a while people began to rhyme or â€Å"rap† over these beats. The first rap recording was â€Å"Rapper’s Delight,† by the Sugarhill Gang in 1979. The technological developments of the early 1980s, including the use of synthesizers and other electronic devices, paved the way for rap, a highly rhythmic style of musical patter that had been popular with New York audiences in the 1970s and later developed wider appeal. Run DMC was largely responsible for the commercialization of rap, their collaboration with Aerosmith on the cover recording of the 1977 hit song Walk This Way introduced the style to white audiences. A year later, conscious rap found its prominent voice in the group Public Enemy. Public Enemy produced several highly influential rap albums. Rap in its diversified forms has continued as one of the most popular types of African American music. (606-607) In the late 1980s rap’s controversial subgenres, gangsta rap raised with the debut album Straight Outta Compton. (Encarta) Machlis and Forney states gangsta rap of the 1990s has further disseminated the style through graphic descriptions of inner city realities. The violent shooting deaths of Tupac Shakur in 1996 and Notorious B.I.G in 1997, has highlighted the violence associated with this musical style. (607) Rhythm and blues did more than just influence other music. It allowed African Americans to sing about their own experiences in their own style and in their own words. Today it is still here in dance parties on Saturday night’s and in churches on Sunday morning. Rhythm and Blues and soul continue to thrive now even more so than rock ‘n’ roll, which dominated the mainstream for so many years. From the classic soul singing of artists such as D’Angelo and Maxwell, to Sam Cooke and Otis Redding, to the eclectic experiment of Andre’ of the hip hop group Outkast. These musicians carry on the tradition of earlier innovators such as Ray Charles, Prince, and Michael Jackson. R B has by far taken over in the 21st century. Although Rhythm and Blue was considered strictly black music, it is loved today by people of all races. One thing we all know is that music of all kinds is the expression of emotion. From folk songs, to religious chants; the range and diversity of music is almost incomprehensible. It has been said that the best way to learn about the people, and its culture, is to observe and listen to their music. Music is all powerful because it stimulates, manipulates and dissipates our moods through the emotions. Music, in our culture, functions in many ways; it can make work more enjoyable, create a fraternity among men, encourage a spirit of worship, and be an expression of emotion. Music can make hard work seem easier, or rather, make it tolerable. If you don’t believe me next time you drive past a house that is undergoing construction or anywhere people are doing hard manual labour, stop and listen for music. Quite often there is a radio blasting. Rhythm and blues music in the 21st century has been used to encourage a spirit of worship and to communicate with God. Many churches today begin their services with some form of worship music, whether it’s all through song or just playing of the Organ. In some form it’s designed to gear people’s minds to hear a word from God. My Church in particular has one hour of worship before the service begins. Although rhythm and blues is not a favorite listen to music by many, we can all agree that its style is the most powerful on earth depending on your age. It can make you fall in love, strike down an enemy, or weep for lost friends. Its style is also a source of reconciliation, exhilaration, and hope that never fails† I thank God for blessing many musicians with the gift of music, If it hadn’t been for one particular song I might be married to my husband today. Without music in everyday life, the world would be an extremely hostile and maybe even an ugly place to be. Music has become the most powerful freedom given by God. Works Cited Handyside, Chris. A History of Soul and RB. A history of American music. Oxford: Heinemann Library, 2006. Machlis, Joseph, Kristine Forney, The Enjoyment of Music: An Introduction to Perceptive Listening. New York: W.W. Norton, 2000. Rhythm and blues. Encyclopedia Britannica. 2008. Encyclopedia Britannica Online. 17   May   2008. http://www.britannica.com/eb/article-9063492. Rhythm-and-Blues Music, Microsoft ® Encarta ® Online Encyclopedia 2008 http://encarta.msn.com 1997-2008 Microsoft Corporation.

Mobile Marketing Essay -- Technology, Mobile Applications

2.1 Handheld Mobile Devices and Mobile Applications 2.1.1 Defining Handheld Mobile Devices The medium for mobile applications is a mobile device. While the functions of mobile devices vary, the key criteria such a device must fulfil is portability. To that extent, mobile devices have been described as ‘interactive wireless media’ (Haghirian and Madlberger 2005, 2). Mobile devices offer a range of capabilities, but essentially they allow access to data and information with the opportunity of being used in a variety of environments (ISACA 2010, 2). The term ‘handheld mobile device’ indicates that the device is limited to something that can be ‘held in the hand(s)’. Even so, the term ‘handheld mobile device’ may represent a different meaning to different people and therefore can be anything from a PDA to a digital camera. For the purpose of this paper, the term handheld mobile device (henceforth abbreviated as mobile device) will be associated only with those mobile computing devices that have the capability of downloading third-party mobile applications (as defined in 2.1.3). Namely, these are smartphones, PDAs and tablet PCs. 2.1.1.1 Mobile phones There are many known terms for mobile phones including cell phone, basic phone, feature phone, traditional mobile phone, smartphone, and system phone. Nonetheless, it can be argued that mobile phones currently on the market are typically categorised as either ‘feature phones’ or a ‘smartphones’. The definitions of these two types are widely discussed and disputed by analysts, manufacturers, journalists, and end users. The lack of a standard definition can be attributed to the advancement of mobile phone technology. As the technology continues to evolve, definitions are subject to ch... ...s have existed since the development of mobile devices. â€Å"Downloadable† applications (such as DMO apps), however, have only spread and reached mainstream usage with the emergence of smartphones and PDAs (Holzer and Ondrus 2011, 22). Beyond the fundamental definition, there are a range of classifications that a mobile application may fall under. In their 2008 white paper on mobile applications, the Mobile Marketing Association (MMA) suggests that, from a technical viewpoint, mobile applications can be distinguished according to the runtime environment in which they function. The MMA lists three types of runtime environments, namely native platforms and operating systems, mobile web and browser runtimes, and other managed platforms and virtual machines. By and large, however, the industry makes a distinction between native applications and web-based applications.

Dak Son Massacre Essay

During the winter of 1967, the people of Dak Son village had no idea what was bound to transpire just mere weeks before Christmas. Unfortunately, when America said it would aid South Vietnam in their struggle to avoid and annihilate the opposing communist forces: North Vietnam and Viet Cong, they didn’t assume that such atrocities were even humanely possible during a war, which caught America more by surprise than they had expected, leaving them with no choice but to exhibit absolutely no mercy to their enemies. Thus, leaving the United States viewing the war as a way to prevent communist takeover and repeal the domino theory. So, we fast forward eight years into the war, long after both sides are seen to be nothing short of ruthless as well as practically nothing less than fearless. They seemed to be pretty evenly matched throughout quite possibly the longest, most grueling war Vietnam has ever gone through. Since the Viet Cong’s headquarters were based in the south, it gave them much more accuracy and success when planning any sort of attack because they see everything their opposition tries to hide. Eventually, the war ended up as a compilation of many, many massacres; Dak Son village being one of the of the few that had survivors give testimonies to the horrors they had to endure solely because they disagreed with communism and the possibility of this village helping some refugees of the Viet Cong escape leading them to reply with an outlandish act of complete and utter vengeance. This left the Viet Cong with no choice but to act upon the burning fiery fuchsia that is their anger. Two battalions of Viet Cong systematically killed 252 civilians with flame-throwers and grenades that week in December, a â€Å"vengeance† attack on a small hamlet less than a mile from the capital in Phuoc Long Province. Survivors of the December 6 attack said the VC (Viet Cong) shouted their intentions to â€Å"wipe out† the hamlet of Dak Son as they struck from the surrounding jungle. A local defense force of 54 men gave ground before the estimated 300 uniformed communists. The village wasn’t exactly prepared for this sort of uncalled for attack, leaving them in utter shambles upon the departure of the Viet Cong. According to the survivors, the VC (Viet Cong) ranged up and down the hamlet streets, systematically burning more than half the 150 thatched homes of the community. Two defenders were killed, four wounded and three are missing. Many of the victims were burned to death in their homes, others, who fled to underground shelters, died as flame-throwers with their napalm-based fuel, were directed into the small shelters. Other Viet Cong threw hand grenades into holes where families were covered. This was certainly a war where morals had no backup and the only thing that was relied upon was our selfish, animal instincts with how we deal the opposition who are our fellow human beings nonetheless.

Operation Of Electrical Equipment In Hazardous Environment Environmental Sciences Essay

Based on my research up to day of the month I came to the decision that risky countries is a large subject to cover and after a series of meetings with my supervisor Mr. Jerry Duggan I have decided to concentrate preponderantly on â€Å" Dust Explosion † a subject which has ne'er been covered before by an electrical technology pupil in Cork Institute of Technology. By finishing this undertaking my purpose is that it will function as an educational tool in our progressive environment for me and for future readers. I hope to larn many things from this undertaking that will profit me in the hereafter and in my calling. I intend to analyze all the of import facets of dust detonation, by reexamining bing literature on the topic, hunt of appropriate web sites and by a possible site visit to a chemical works near me.1 Introduction:In Electrical technology, a risky location is defined as a topographic point where concentrations of flammable gases, bluess, or dusts may happen. Electrical equipment that must be installed in such locations is particularly designed and tested to guarantee it does non get down an detonation, due to curving contacts or high surface temperature of equipment. For illustration a family light switch may breathe a little, harmless seeable flicker when shift ; in an ordinary ambiance this discharge is if no concern, but if a flammable vapor was present, the discharge might get down an detonation. Electrical equipment intended for usage in a chemical mill or refinery is designed non to bring forth any flickers, or else to safely incorporate the discharge and do certain it can non light any explosive gases, bluess or dusts that might be present around the equipment. Many schemes exist for safety in electrical installings. The simplest scheme is to minimise the sum of electrical equipment installed in a risky country, either by maintaining the equipment out of the country wholly or by doing the country less risky by procedure betterments or airing with clean air. Intrinsic safety is a pattern where setup is designed with low power degrees and low stored energy, so that a mistake is improbable to put off an detonation. Equipment enclosures can be pressurized with clean air, and interlocked so that the equipment is disconnected if the air supply fails or arc-producing elements of the equipment can be isolated from the environing atmosphere by encapsulation, submergence in oil, sand, or by hardy enclosures that prevent extension of an internal detonation to the environing ambiance. As in most Fieldss of electro engineering, different states have approached the standardisation and testing of equipment for risky countries in different ways. As universe trade becomes more of import in distribution of electrical merchandises, international criterions are easy meeting so that a wider scope of acceptable techniques can be approved by national regulative bureaus. Standards regulating electrical equipment for usage in risky dust countries are altering so quickly that purchasers and users of electrical production equipment are happening it hard to maintain up. However, A by non maintaining abreast of the alterations, they run the hazard of a dust detonation happening in their works due to inadequately protected equipment and/or being prosecuted forA non-compliance or carelessness. The hazard of a dust or pulverization detonation happening in a fabrication works should non be underestimated. Around 2,000 dust detonations occur in Europe every twelvemonth, impacting all types of companies, including makers of sugar, coal, chocolate, flour-based goods, milk pulverization, tea, grain, fresh fish and baccy, every bit good as wood and metal processing companies. Any environment in which dust or pulverization is allowed to garner on hot surfaces or that could be ignited by a flicker from electrical equipment is a possible hazard. The cost, in footings of lives lost and harm to works, as a consequence of a dust detonation can be tremendous.2 Dust Explosion:Definition: Dust detonations occur when all right atoms dispersed in the air as a cloud react with O in the presence of an ignition beginning, bring forthing an detonation concatenation reaction. When this occurs in a changeless volume, there is a rapid and important addition in force per unit area. Prevention steps must be the first line of defense mechanism against such detonations, but in many state of affairss efforts to extinguish ignition beginnings are merely non plenty. Measures for extenuating the harm caused and the dangers posed to workers by eventual detonations are necessary. To assist vouch the safety of silo installings, companies in Europe are required to follow with the ATEX Directives sing explosive ambiances ( [ ATEX 1999/92/EC, 1999 ] and [ ATEX 94/9/EC, 1994 ] ) by put ining protection mechanisms.3 What is a dust detonation?Explosions are defined as sudden reactions affecting a rapid physical or chemical oxidization reaction, or disintegrate bring forthing an addition in temperature or force per unit area, or both at the same time. When the fire velocity is greater than the velocity of sound, we call it a explosion. Otherwise the detonation is known as a deflagration. Typically, dust detonations are comparatively slow burning procedures. If ignition occurs i n a dust cloud in an unfastened country, so small or no overpressure consequences and the primary jeopardy is a bolide. The best manner to acquire informations refering a specific type of dust is to make proving on the existent substance. Most written proficient resources on dust detonations have informations for the minimal explosive concentrations and other belongingss of common pulverizations.4 European Laws:In July 2006 a 2nd ATEX directive became compulsory European Standard EN 14491, 2006 EN 14491 for dust detonation venting protective systems and CEN ( 2006 ) .EN 14491 ( 2006 ) for the discharge of dust detonations came into force in 2006 and depict the basic design demands for dust detonation venting systems. This criterion is one of a series including criterions EN 14797 ( 2006 ) and EN 14460 ( 2006 ) on blowhole industry and detonation immune constructions. Together, these three criterions wholly cover dust detonation venting ordinances in Europe.5 Conditionss for dust det onation:As we all know detonation can merely happen, when three factors come together: 1. Flammable stuff ( in burnable measures ) 2. Oxygen ( in the air ) 3. Ignition beginning Fig.1 An detonation can merely happen, when these three factors come together Once the reaction is ignited, depending on how the exothermal energy is liberated, the consequences can be a controlled burning, fire moving ridge or detonation. All the protection methodological analysiss are seeking to extinguish one or more of the trigon constituents to cut down the hazard of lighting an detonation to an acceptable degree. To obtain an acceptable degree of hazard at least two independent events must be present, each one of low chance, before a possible detonation can happen. There are besides five necessary conditions for dust detonation to happen: a dust has to be combustible the dust is suspended in the air at a high concentration there is an oxidizer ( typically atmospheric O ) the dust is confined there is an ignition beginning Fig.2 Necessary conditions for dust detonation to happen The add-on of the two elements scattering and parturiency to the trigon ( see fig.1 ) creates what is known as the â€Å" detonation Pentagon † ( see fig. 2 ) . An initial primary detonation ( see fig. 3 ) in treating equipment or in an country were fleeting dust has accumulated may agitate free more accrued dust or damage a containment system such as a canal, vas or aggregator. As a consequence, if ignited, the extra dust dispersed into the air may do one or more secondary detonations ( see fig. 3 ) . These can be far more destructive than a primary detonation due to increased measure and concentration of spread combustible dust. Fig. 3 Primary and secondary dust detonations If one of the elements of the detonation Pentagon is losing, a ruinous detonation can non happen. Two of the elements in the detonation Pentagon are hard to extinguish: O ( within air ) , and parturiency of the dust cloud ( within procedures or edifices ) . However, the other three elements of the Pentagon can be controlled to a important extent, and will be discussed farther in this papers.6 Facility Dust Hazard Appraisal:As I have mentioned above a combustible dust detonation jeopardy may be in a assortment of industries, including: nutrient ( e.g. , confect, amylum, flour, provender ) , plastics, wood, gum elastic, furniture, fabrics, pesticides, pharmaceuticals, dyes, coal, metals ( e.g. , aluminum, Cr, Fe, Mg, and Zn ) , and fossil fuel power coevals. The huge bulk of natural and man-made organic stuffs, every bit good as some metals, can organize combustible dust. The European`s Industrial Fire Hazards Handbook provinces that â€Å" any industrial procedure that reduces a combustible stuff and some usually non-combustible stuffs to a finely divided province nowadayss a possible for a serious fire or detonation. † 7 Facility Analysis Components: Facilities should carefully place the followers in order to measure their possible for dust detonations: Materials that can be combustible when finely divided ; Procedures which use, consume, or produce combustible dusts ; Open countries where combustible dusts may construct up ; Hidden countries where combustible dusts may roll up ; Meanss by which dust may be dispersed in the air ; and Potential ignition beginnings.8 Beginnings of ignition:There are many beginnings of ignition and a bare fire need non be the lone one, a study shows that half of the dust detonations in Europe were from non-flame beginnings. Beginnings include fire hot surfaces clash curving from machinery or other equipment illuming work stoppages cutting and welding fires mechanical machinery As I mentioned earlier at the start of the study a differentiation is made between primary and secondary dust detonations. When a dust is found in a container, room or system component ignites and explodes we speak of a primary dust detonation. In a secondary dust detonation, dust that has settled on the land or on other surfaces is stirred by the primary detonation and ignites. As a consequence of this a concatenation reaction follows and the force per unit area wave emanating from the secondary dust detonation can stir up farther dust sedimentations and do farther dust detonations.9 Example of Historic Incidents:The undermentioned incident is an incident that marked the universe, in February 2008, a ruinous dust detonation occurred at the Imperial Sugar Refinery in Port Wentworth, USA. The dust detonation killed 13 people and injured many more. The undermentioned images below show the amendss of the refinery after the catastrophe ;10 Measuring the hazard:Identifying risky or non-hazardous countries should be carried out in a systematic manner. Risk appraisal should be used to find if risky countries exist and to so delegate zones to those countries. The appraisal should see such affairs as: the risky belongingss of the unsafe substances involved ; the sum of unsafe substances involved ; the work processes, and their interactions, including any cleansing, fix or care activities that will be carried out ; the temperatures and force per unit areas at which the unsafe substances will be handled ; the containment system and controls provided to forestall liquids, gases, bluess or dusts get awaying into the general ambiance of the workplace ; any explosive ambiance formed within an enclosed works or storage vas ; and, any steps provided to guarantee that any explosive ambiance does non prevail for an drawn-out clip, e.g. airing. Taken together these factors are the get downing point for risky country categorization, and should let for the designation of any zoned countries. The undermentioned paragraphs give farther information on what to see during an appraisal.11 The risky belongingss of unsafe substances:The belongingss of a unsafe substance that need to be known include the boiling point and brassy point of any flammable liquid, and whether any flammable gas or vapor that may be evolved is lighter or heavier than air. For dusts, information on atom size and denseness will be needed, one time it has been shown that a peculiar dust can organize an explosive ambiance. Often, relevant information is contained on a safety informations sheet provided with the merchandise.12 The size of possible releases:Some possible beginnings of release may be so little that there is no demand to stipulate a risky country. This will be the instance if the effect of an ignition following a release is improbable to do danger t o people in the locality. However, in the incorrect fortunes ignition of rather little measures of flammable gas/vapour assorted with air can do danger to anyone in the immediate locality. Where this is the instance, as in a comparatively confined location, from which rapid flight would be hard, country categorization may be needed even where rather little measures of unsafe substance are present. The size of any possible explosive ambiance is, in portion, related to the sum of unsafe substances present. Industry specific codifications have been published by a assortment of organisations to supply counsel on the measures of assorted unsafe substances that should be stored. For illustration,13 Temperatures and force per unit areas:Extra information associating to the procedure that involve the unsafe substances should besides be taken into history, including the temperatures and force per unit areas used in the procedure, as this will act upon the nature and extent of any release, and the extent of any subsequent risky countries. Some substances do non organize explosive ambiances unless they are heated, and some liquids if released under force per unit area will organize a all right mist that can detonate even if there is deficient vapor.14 Ventilation:Ventilation, either natural, or automatically ( e.g. produced by fans ) , can both dilute beginnings of release, and take unsa fe substances from an enclosed country. As a consequence there is a close nexus between the airing at any given location and the categorization and extent of a zone around a possible beginning of release. Well designed airing may forestall the demand for any zoned country, or cut down it so it has a negligible extent.15 Extent of risky countries:The appraisal needs to place countries within a workplace that are connected to topographic points where an explosive ambiance may happen. This will supply information on any countries off from the beginning of the jeopardy to which an explosive ambiance may distribute, for illustration through canals. Such countries should be included in the categorization system for topographic points where explosive ambiances may happen. An attack to measuring this hazard is described in BS EN 60079/10. A technique for forestalling this hazard is described in BS EN 50016, on pressurisation of enclosures or suites incorporating electrical equipment.16 Othe r considerations:When sing the potency for explosive ambiances, it is of import to see all unsafe substances that may be present at the workplace, including waste merchandises, residues, stuffs used for cleansing or care, and any used merely as a fuel. Besides some combinations of unsafe substances may respond together, organizing an ignition beginning, or in combination may organize an explosive ambiance, where singly this does non happen. Some perennial activities such as refuelling autos, or lading and droping oilers intended for usage on the public roads, involve the debut of possible beginnings of ignition into an country where a spill is possible, and which would run into the description of a risky country. In these fortunes, safety can be achieved by insulating power beginnings ( e.g. turning off engines, etc ) while a transportation is taking topographic point, and doing suited cheques before and after a transportation, before traveling a vehicle into or out of a risky country. Activities, such as care, may incur hazards non covered by the normal country categorization of the country where the activity is taking topographic point, for case the debut of beginnings of ignition into a risky country. Sometimes the unsafe substance can be removed before the care work activity starts. Sometimes, particular control steps can be taken to forestall the release of any unsafe substance during the work. In such instances the extra hazards associated with the activity should be assessed before work starts.17 Relationship between fires and detonations:In many instances where an explosive ambiance can organize, any ignition will do a fire instead than an detonation. Both fire and detonation cause dangers to workers, and in many instances the safeguards required to forestall an ignition are the same. The overall bundle of safeguards required will depend on the possible effects of a fire or detonation. Many factors influence the hazards from a fire affecting unsafe substances. In peculiar, employers should see whether a fire could take to an detonation, how fast a fire might turn, what other stuffs might be quickly involved, any dangers from fume and toxic gases given off, and whether those in the locality would be able to get away.18 Classifying risky countries into zones:Once an country has been identified as risky it should be classified into zones based on the frequence and continuity of the potentially explosive ambiance. This so determines the controls needed on possible beginnings of ignition that may be present or happen in that country. These controls apply peculiarly to the choice of fixed equipment that can make an ignition hazard ; but the same rules may be extended to command the usage of nomadic equipment and other beginnings of ignition that may be introduced into the country ( for illustration, lucifers and igniters ) and the hazards from electrostatic discharges. An international criterion, BS EN 60079/10, explains the basic rules of country categorization for gases and bluess, and its equivalent for dusts was published in 2002 as BS EN 61241/3. These criterions form a suited footing for measuring the extent and type of zone, and can be used as a usher to following with the demands in DSEAR. However, they can non give the extent and type of zone in any peculiar instance, as site-specific factors should ever be taken into history. Industry specific codifications have besides been published by assorted administrations and, provided they are applied suitably, they are valuable in promoting a consistent reading of the demands. Area categorization surveies normally take the signifier of drawings placing the risky countries and zones. Additional text gives information about the unsafe substances that will be present, the work activities that have been considered, and other premises made by the survey. Whenever such drawings and paperss have been produced, they should be included in the hazard appraisal record required by DSEAR. These paperss should be considered whenever new equipment is to be introduced into a zoned country. Hazardous topographic points are classified in footings of zones on the footing of the frequence and continuance of the happening of an explosive ambiance.Gass, bluess and mistsFor gases, bluess and mists the zone categorizations are: Zone 0 – can be describes as a topographic point in which an explosive ambiance dwelling of a mixture with air of unsafe substances in the signifier of gas, vapor or mist is present continuously or for long periods or often. Zone 1 – can be described as a topographic point in which an explosive ambiance dwelling of a mixture with air of unsafe substances in the signifier of gas, vapor or mist is likely to happen in normal operation on occasion. Zone 2 – can be describes as a topographic point in which an explosive ambiance dwelling of a mixture with air of unsafe substances in the signifier of gas, vapor or mist is non likely to happen in normal operation but, if it does happen, will prevail for a short period merely.DustsFor dusts the zone categorizations are: Zone 20 – can be describes as a topographic point in which an explosive ambiance in the signifier of a cloud of combustible dust in air is present continuously, or for long periods or often. Zone 21- can be describes as a topographic point in which an explosive ambiance in the signifier of a cloud of combustible dust in air is likely to happen in normal operation on occasion. Zone 22 -can be describes as a topographic point in which an explosive ambiance in the signifier of a cloud of combustible dust in air is non likely to happen in normal operation but, if it does happen, will prevail for a short period merely.19 Equipment in risky countries:Particular safeguards need to be taken in risky countries to forestall equipment from being a beginning of ignition. In state of affairss where an explosive ambiance has a high likeliness of happening, trust is placed on utilizing equipment with a low chance of making a beginning of ignition. Where the likeliness of an explosive ambiance happening is reduced, equipment constructed to a less strict criterion may be used. Equipment is categorised ( 1, 2 or 3 ) depending on the degree of zone where it is intended to be used. A figure of ways of building equipment to forestall ignition hazards have been published as consonant European Standards, and in some instances, extra demands are set out in the Standards associat ing to installing and usage. The risky country zone categorization and corresponding equipment classs are: Zone 0 or zone 20 – class 1 equipment Zone 1 or zone 21 – class 2 equipment Zone 2 or zone 22 – class 3 equipment20 Marking of equipment:A standardized marker strategy is applied to place equipment suited for a specific location. Equipment built will transport the detonation protection symbol â€Å" Ex † in a hexagon, the equipment class figure ( 1, 2, or 3 ) , the missive G and/or D depending on whether it is intended for usage in gas or dust ambiances, and other indispensable safety information. In many instances this will include a temperature evaluation expressed as a â€Å" T † marker, and sometimes a gas group. These indicate restrictions to safe usage. Employers and those installing equipment should see the marker and certification provided with â€Å" Ex † equipment when it is being installed. All ATEX equipment will be required to transport three Markss. The CE grade The ATEX grade The Certification Code Additionally, it must be marked decipherably with the following minimal specifics: Name and reference of maker Appellation of series/type/model Consecutive figure Year of industryThe CE Mark:All ATEX equipment must transport CE grade ; the minimal tallness is 5mm. The CE grade confirms conformity with all the comparative Directives.The ATEX Mark:The ATEX grade ( EU Explosive Atmosphere symbol ) is a bluish hexagon incorporating the conventionalized letters ExThe Certification Code:All equipment points are required to transport the Certification Code as portion of their designation label.Log Table:Date 9/11/2009 I met up Mr. Jerry Duggan and discussed the importance of this undertaking and what country of jeopardies am I interested in to cover my undertaking. Date 11/11/2009 In my ain clip I got to seek the webs and happen out what is a dust detonation and what universe and European Torahs are out at that place to forestall these detonation from go oning and if they do go on due to unknown fortunes, how to carry on an detonation appraisal. Date 14/11/2009 I did some book research and reading from what was available in the library and what Mr. Jerry Duggan gave me and go really familiar with the factors that can take to an detonation. The book entitled â€Å" Electrical Apparatus and Hazardous Areas † became really ready to hand to understand the different zones for gas and blues, and dust jeopardies. Date 17/11/2009 After farther research in jeopardies I have decided to concentrate merely on one country preponderantly â€Å" dust detonation † . The meeting helped me understand how to near this country, which non many people know excessively much about. Date 19/11/2009 While making some internet research I came across a papers saying that half of the dust detonations go oning in Europe were from non-flammable beginnings. The beginnings that could take to an ignition were stated and an incident illustration was given. Date 21/11/2009 As a consequence of including an illustration of dust detonation that took topographic point in the USA, I wanted to show a hazard appraisal in order to find if risky countries exist in an enclosed country and so to delegate zones to those countries. Date 23/11/2009 I showed Mr. Jerry Duggan my up to day of the month research on dust detonation and advised me to seek and acquire a site visit which will profit me better on my stage research and the completion of the study. Date 24/11/2009 On this twenty-four hours I researched how would ventilation either of course or automatically ( produced by fans ) can both seek and extinguish beginnings of release and most of import take the unsafe substances from an enclosed country. Date 27/11/2009 Leaving unprecedented work unfinished from the day of the month of 14/11/2009 I wanted to lucubrate more on the designation of a hazard topographic point and the categorization into zones. Research had to be done to happen a definition on the zones categorization for dust. Date 30/11/2009 After farther desk research I met up once more and discussed the layout of my concluding twelvemonth presentation and a day of the month was set on the 10/12/2009 along with my assessor.Table of figures:The undermentioned figures are listed below as they appear in the study: Figure 1: An detonation can merely happen, when one of this factors come together Figure 2: Necessary conditions for dust detonation to happen Figure 3: Primary and secondary dust detonationsBooks:Electrical Apparatus and Hazardous Areas/Fifth Edition by Robin Garside Electrical Installation in Hazardous Areas by Alan McMillan Introduction to Intrinsic SafetyLinks & A ; Mentions:HBIRDPRO- # 692251-HOT Work HBIRDPRO- # 570000-Safety Signs HBIRDPRO- # 562514-Welding Thymine: TemplatesOH & A ; S – Occupational Health & A ; SafetyPTW Hot Work Control Guide.dot Thymine: TemplatesOH & A ; S – Occupational Health & A ; SafetyATW Hot Work Control Guide.dot OH & A ; S – Occupational Health & A ; SafetyHazardous Area Check Sheet Equipment In Combustibles Dust Areas www.encoderonline.com/UK/Data-Sheets/Incremental/Data-14.htmDocuments:Corporate Standard Hazardous Areas Handbook for risky country solution No. 14 – AB – Iraqi national congress A cosmopolitan attack for hazardous-area categorizations A usher to European ( EEC ) enfranchisement for electrical equipment in risky countries DOE Handbook Electrical Safety 1998Web sites:www.rowanhouse.co.uk www.stackmasula.com.au www.intrinsicallysafe.com www.stahl.de